Basic information
| Manufacturer | Matho Models |
| Product code | MTH-35118 |
| Weight: | 0.02 kg |
| Ean: | 5449612351189 |
| Scale | 1:35 |
| Added to catalog on: | 2.2.2021 |
Product Description
Contains 1 A6 sized sheet sheet of water slide decals with different yellow/black warning markings.
Of each type 1 larger area is provided, cut to size to match your specific needs, be it one long and narrow tape, or a larger area, everything is possible with this method. Can be used for more than 1 project.
The decals are not pre-weathered yet, so you can apply the level of weathering that you like.
Features:
water-slide decals with separated film
semi-matte finish
ultra-thin decal will adapt well to any surface
Hi-definition printing gives a crisp result, even in the smallest details
colors are accurate and colorfast
1:35 scale, but can also be used for other scales
How to use:
cut out a decal with a sharp knife
put in water for about 5 - 10 seconds to loosen the decal from its carrier paper
gently slide off the decal into position using tweezers
use decal softener (for example Micro Set & Sol) for better adhesion, especially for use on non-flat surfaces
use tissue paper and apply some light pressure over the decal, to remove any excess water/decal softener and fix the decal into position
airbrush some varnish for protection - (semi-)matte varnish can remove the glare if needed
start the usual weathering process to blend into your design
Mistake in the description? Report problem
...